Setting The Time - Kodak ADVANTIX T570 Mode D'emploi

2. Repeatedly press
MENU
blinking "date format" of your choice
appears on the LCD panel (9).
• The blinking "E" indicates there is no
film in the camera.
3. Press (14) to set the format.
ENTER
• If the camera is already at this format,
you can bypass this step.
6
(13) until the 4. Press
for month.
5. Repeatedly press and/or hold
select the new number for month.
6. Press
to actuate the setting for day.
• Press
7. Follow steps 4 and 5 to finish setting
the date.
Setting the time (hour/minutes)
The camera has a 12-hour clock with
PM display.
1. Completely lift up the Lens cover/
flash (2) to raise the flash and to turn on
the camera.
(18) to actuate the setting
SELECT
(14) to set the month and
ENTER
again if you want to end
ENTER
the selection.
to
SELECT