JVC KD-R841BT Manuel D'instructions page 15

Bluetooth audio player
Operations and display indications may differ according to their
availability on the connected device.
To Do this
Playback 1
Press L SOURCE to select BT AUDIO.
2
Operate the Bluetooth audio player to
start playback.
Pause or resume
Press MENU (or
playback
Press 1 ∞ / 2 5 (or 5 / ∞ on RM-RK52).
Select group or folder
Press E / F (or 2 / 3 on RM-RK52).
Reverse/forward skip
Press and hold E / F (or 2 / 3 on
Reverse/fast-forward
RM-RK52).
Repeat play Press 6 B repeatedly to make a
selection.
TRACK RPT, ALL RPT, RPT OFF
Random play Press 5 A repeatedly to make a
selection.
GROUP RND, ALL RND, RND OFF
Bluetooth settings
1
Press and hold MENU.
2
Turn the volume knob to select [BLUETOOTH], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
Repeat step 3 until the desired item is selected.
4
Press MENU to exit.
PHONE * 1
AUDIO
APPLICATION
DELETE PAIR
P.BOOK WAIT
on RM-RK52).
SET PINCODE
AUTO CNNCT
INITIALIZE
INFORMATION
* 1 [CONNECT] will not be displayed if two Bluetooth phones are connected at the same time.
* 2
JVC Smart Music Control is designed to view JVC car receiver status and perform simple
control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www3.jvckenwood.com/english/car/index.html> (English website only).
*
3 Displayed only when a Bluetooth phone/audio player/application is connected.
13
CONNECT / DISCONNECT: Connects or disconnects the Bluetooth phone or Bluetooth audio
player.
CONNECT / DISCONNECT: Connects or disconnects the JVC Smart Music Control *
phone.
Selects the registered (paired) device to delete.
Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP.
Changes the PIN code (up to 6 digits). (Default PIN code: 0000)
1 Turn the volume knob to select a number.
2 Press E / F to move the entry position.
Repeat steps 1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
ON: Connects automatically with the Bluetooth device when the unit is turned on. ; OFF: Cancels.
YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO: Cancels.
PH CNNT DEV / AU CNNT DEV / APP CNT DEV *
device name. ; MY BT NAME: Displays the unit name (JVC UNIT). ; MY ADDRESS: Shows address
of this unit. ; BT VERSION: Shows the Bluetooth version of this unit.
BLUETOOTH®
Default: XX
2
in the smart
3
: Displays connected phone/audio/application
ENGLISH