Marklin Digital 7286 Mode D'emploi page 11

Important Information:
The turning speed of the deck can be set individually by adjusting
the motor rpm (see setting the decoder).
Keyboard as a Controller
The turntable receiver has been coded with the address 15 and
is permanently assigned to the Keyboard. The Keyboard must
also be coded to address 15 in order to operate the decoder (see
instructions for the Keyboard). The decoder can be changed to
address 14 by changing the solder bridge.
A template is included with the decoder, and this template is laid
on the keypad for the Keyboard in order to indicate the functions
of the individual buttons.
The spoke tracks are consecutively numbered clockwise. Spoke
tracks opposite these tracks have the same number, since they
are connected through the deck.
���� ������ �����
��
� �
��
���� �����
�
�����
� �� ��
�� �� ��
� � �
�
� � �
�� �� �� ��
�� ��
�� ��
Setting the decoder
Buttons
end
input
clear
turn
step
>
<
�
�
1 - 24
��
��
Operating Function Programming Function
Interruption
Within the first 5 sec.;
switches to the
programming mode
Resumption
connection memory,
current track connection
o
Turning 180
Turning to the next Turning to program the
track next track connection
right
left
Rotation Direction
right
left
Going directly
to the programme
track connection
Memory
Deletion of track
becomes Track 1
—
right
left
Rotation Direction
right
left
Selecting the motor
speed
11