Adjusting The Sound - JVC KD-AR360 Manuel D'instructions

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Ex.: When "TRE" is selected
2
Indication pattern changes as
you adjust the level.
Indication To do:
BAS* Adjust the bass.
1
(bass)
TRE* 1 Adjust the treble.
(treble)
FAD* 2 Adjust the front
(fader) and rear speaker
balance.
BAL Adjust the left
(balance) and right speaker
balance.
LOUD* Boost low and
1
(loudness) high frequencies
to produce a well-
balanced sound at
low volume level.
VOL* 3 Adjust the
(volume) volume.
1
* When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
2
* If you are using a two-speaker system, set
the fader level to "00."
3
* Normally the control dial works as the
volume control. So you do not have to select
"VOL" to adjust the volume level.
* 4 Depending on the amplifier gain control
setting. (See page 21 for details.)
Range
–06 (min.)
to
+06 (max.)
–06 (min.)
to
+06 (max.)
R06 (Rear
only)
to
F06 (Front
only)
L06 (Left
only)
to
R06 (Right
only)
LOUD ON
LOUD OFF
00 (min.) to
30 or 50
(max.)*
4
19