Rimage PrismPlus! Perfect Image Manuel D'utilisation page 10

Rimage PrismPlus!
Operator button
Press the operator button to open and close the printer tray. There is a yellow indicator light in the
center of this button.
Indicator lights
The indicator light conditions described below reflect conditions on a Standalone PrismPlus
printer. PrismPlus printers that are mounted on autoloaders have different conditions. For
conditions of printers on autoloaders, refer to the autoloader user guides.
Image Name
Error
Disc Not
Present
Active
4
Functionality
• The yellow indicator light located on the operator button
illuminates when an error occurs while printing.
• The Error indicator light and the Disc Not Present indicator light
flash when the printer is in cleaning mode.
• The error indicator light illuminates and the Disc Not Present
indicator light flashes at a slow rate when the ribbon is out.
• The yellow Disc Not Present indicator light flashes a fault code
when an error occurs. After the error is resolved, press the
Operator button to turn off the indicator light.
• The Disc Not Present indicator light illuminates when the tray is
empty or when the disc is not properly clamped. When a disc is
placed on the tray, the Disc Not Present indicator light turns off.
• In Multiple Copy mode, the Disc Not Present indicator light
illuminates until the disc is removed from the pad.
• The Disc Not Present indicator light flashes continuously at a
slow rate when the ribbon is low (less than 100 prints remain).
This applies only to monocolor ribbons and only if you have not
changed or switched ribbons since loading the current ribbon.
• The Disc Not Present indicator light flashes at a slow rate while
the error indicator light illuminates when the ribbon is out.
• The Disc Not Present indicator light and the Error indicator light
flash when the printer is in cleaning mode.
• The yellow Active indicator light flashes when the printer is
operating.
• The Active indicator light flashes continuously at a slow rate
when the printer is in AutoPrinter mode.
110635_H