Set To Storage Mode - Simons Voss Technologies MK.PINCODE.ONLINE Guide Abrégé

3. Configuration
2. Enter the Master PIN.
3. Enter the length of the User PIN – e.g. 4 for a 4-digit User PIN.
9
9

3.3 Set to storage mode

IMPORTANT
If the PIN code keypad is to be used in a different MobileKey system, the
PIN code keypad not only needs to be deleted in the web app, but also
set to storage mode.
The PIN code keypad can be reset to storage mode. This process also
deletes all network settings.
IMPORTANT
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the
process.
1. Enter 000 00.
2. Enter the Master PIN.
9
9
30 / 144
9 PIN code keypad beeps and flashes green briefly twice.
PIN code keypad beeps and flashes green briefly twice.
The User PIN length has been successfully changed.
PIN code keypad beeps and flashes green briefly twice.
Storage mode set.
MK.PINCODE.ONLINE
EN