Configuration; Changing The Master Pin - Simons Voss Technologies MK.PINCODE.ONLINE Guide Abrégé

3. Configuration

3 Configuration
IMPORTANT
Cancellation of actions
All actions can be cancelled by not making any further inputs. The PIN
code keypad will cancel the action after a waiting period.

3.1 Changing the master PIN

You only need to carry out this step if no new Master PIN has been
programmed yet. You cannot start any configurations until you change
the Master PIN. The Master PIN can be changed at any time. No
programming is required to make a change. The Master PIN is unable to
open any locks.
IMPORTANT
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the
process.
1. Enter 000 0.
2. Enter the default or old Master PIN (default: 123 456 78).
3. Enter the new Master PIN.
28 / 144
9 PIN code keypad beeps and flashes green briefly twice.
MK.PINCODE.ONLINE
EN