Intended Use; Safety Instructions - Simons Voss Technologies MK.PINCODE.ONLINE Guide Abrégé

MK.PINCODE.ONLINE

1 Intended use

Use the PIN code keypad MobileKey to operate locking devices by
entering an authorised User PIN (see section on
You need to change the Master PIN and assign a User PIN to do so.
You can programme the PIN code keypad using the MobileKey web
app. The PIN code keypad is added as a "key" with PINs and assigned
to a lock.
The PIN code keypad contains a LockNode with a "Chip ID" and is
assigned to the SmartBridge located within range when the network is
configured. If a correct user PIN length has been entered, the PIN is
transmitted to the lock via WaveNet, where it is evaluated.

2 Safety instructions

WARNING
Blocked access
Access through a door may be blocked due to incorrectly fitted or incor-
rectly programmed components. SimonsVoss Technologies GmbH is
not liable for the consequences of incorrect installation, such as phys-
ical damage or any other losses, or blocked access to injured persons or
those at risk.
EN
1. Intended use
}
Operation [ 32]
).
25 / 144