Clearing A Cutter Lock (1) - Citizen CT-S801 Type II Mode D'emploi

4.2 Clearing a Cutter Lock (1)

The message "Cutter lock" may appear and the auto cutter blade may remain
extended because a foreign object or paper jam is obstructing it.
If "Cutter lock" is displayed, clear the locked cutter as shown below.
1. Turn on the power.
2. Pull the cover open lever forward and open the pap er cover.
3. Remove any jamme d paper includin g any scraps of paper. (Remo ve the pap er roll
that is loaded in the hold er also.)
4. Relo ad the pape r roll and close the paper cover.
CAUTION
 The print head is hot immediately after printing. Do not touch it.
 Do not touch the print head with bare hands or metal objects.
After doing the procedure in "Clearing a Cutter Lock (1)" and then opening the
paper cover, if the blade of the auto cutter is extended, do the procedure in
"Clearing a Cutter Lock (2)".
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Refer to 4.3 Clearing a Cutter Lock (2)
— 47 —
V10 CONSUMIBLES S.L.