Citizen CT-S801 Type II Mode D'emploi page 68

Switch no.
MSW9-4
MSW9-6
MSW9-7
MSW9-8
MSW10-1
MSW10-2
MSW10-3
MSW10-4
MSW10-5
MSW10-6
MSW10-7
MSW10-8
MSW13-1
MSW13-5
MSW13-6
Notes:
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other
conditions, the motor and printing may occasionally stop which causes white stripes in the
printout. To print high-density data, set MSW2-3 (Spool Print) to ON to reduce striping, although
this increases the time before printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: Label printing
*3: Black mark model
*4: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF .
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Function Initi al settin g
Invalid
Multi-byte Char
Engl ish
LCD Language
Valid
LCD Ext Char
Never
LCD Auto Off
100 %
Print Density
Level 9
Print Speed
Before Busy Before Busy, Same Period, After Busy
ACK Timing
Invalid
Old command
Not by
Buzzer Event
C.Open
Tone 2
Buzzer Sound
Invalid
Key Lock
Normal
LCD Direction
Low/ All
Security/Target
Discoverable No Response, Discoverable
BT Device Scan
Valid
Auto Reconnect
V10 CONSUMIBLES S.L.
Setting value
JIS(JPN), SJIS:CP932 (JPN), SJIS:X0213(JPN),
GB18030(CHN), KS Hangul(KOR), EUC Hangul(KOR),
BIG5(TWN), Invalid
English, Français, Deutsch, Italiano, Español,
Japanese, Chinese
Invalid, Valid
Never, 30seconds, 5minutes
70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 %,
110 %, 115 %, 120 %, 125 %, 130 %, 135 %, 140 %
Level 1, Level 2, Level 3, Level 4, Level 5, Level 6,
Level 7 , Level 8, Level 9
Invalid, CBM1, CBM2
All Event/Error, Not by C.Open, Not by C.Open/PE
Tone 1, Tone 2, Tone 3, Tone 4
Invalid, Valid
Normal, Inverted
Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired only
Invalid, Valid
— 64 —