Astralpool 16631 Mode D'emploi page 16

2. Close the bleed valve (P)
3. Put the filtration equipment in operation.
4. Open the outlet valve (2) and the inlet valve (1), letting the water circulate
through the CLORIMAX.
5. After a few minutes, check that there is no loss of water in the installation.
CLORIMAX OPERATION
With the load inside the dispenser and it is closed:
1. Keep the drain valve (P) closed.
2. Open the water outlet valve (2) completely.
3. Open the water inlet valve (1), adjusting it to obtain a chlorine residual in the
pool water between 0.5 and 2 ppm. If disinfected with bromine, its residual must
be between 3 and 6 ppm.
"SELECTION OF THE CLORIMAX LOAD"
SWIMMING POOL
��
CAPACITY IN ��
0-100
100-200
200-300
300-400
400-500
DISPENSER
MODEL
16631 or 15210
16631 or 15210
16631 or 15210
16632 or 15211
16632 or 15211
TRICHLORO
34433, 34434,
34435, 34437
COMPACT LOAD
(kg*s)
2-4
4-8
8-12
12-16
16-20
16
Concentration (kg*s/l)
0-0,00004
0.00004
0.00004
0.00004
0.00004