Di4 Vapore Stiro Duo 2600 Mode D'emploi page 17

BEFORE THE FIRST USE
Before using the steam iron, please ensure you read the user manual and understand all parts and features of the
Steam Station. Be sure to remove any packaging material and labels before using for the first time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes and
there may be traces of dirt on the soleplate
This product has a locking stand to place the iron, with a 3-position switch:
CORDED IRONING
Place the iron on the stand while switch is on the lower position (c) Take the iron from the stand for ironing as a
traditional iron.
CORDLESS IRONING
The iron should be placed on the stand while the switch is on the lower position (c) To change to cordless ironing,
while the iron is on the stand, switch to the upper position (a) The power unit will be fixed to the stand and you can
take the iron for cordless ironing.
For cordless ironing the first time you need to charge the product for at least 60 seconds (let the product on the
stand on power unit) Make sure the pilot light turns off to make sure the temperature selected has been reached.
When the product is used for cordless ironing take into account the following conditions and the time of use for each
in order to keep soleplate temperature suitable for ironing:
- For powerful burst of steam function, can use for about 30 seconds before recharging on the stand.
- For use constant steam function, can use for about 45 seconds before recharging on the stand
- For dry ironing function, can use for about 2 minutes before recharging on the stand.
Always replace the iron on the stand during ironing intervals. If the soleplate temperature is lower than the set
temperature, the pilot light will remain on until the soleplate temperature reached the one set on the temperature
control.
We recommend to use the iron in cordless position when the length of time ironing is not too long. We recommend
to use the corded ironing if you intend to steam iron for a long time and when you apply several shots of steams, as
this will cause the soleplate to cool down considerable.
STORAGE POSITION
While iron standing on base, move position switch to middle position (b) for storage. The iron and power unit will
remain fixed to the stand and you can hold the complete unit from the handle for storage of the product.
HOW TO USE
Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these instructions
in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing instructions or in
fabric label.
Marking
. (1 dot)
. . (2 dots)
... (3 dots) / MAX
Material, for example
Acetate, elastane, polyamide, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
17