3) Stop the tractor and let the operators get on the work
vehicle.
4) In the planting stage, the operators on the work vehi-
cle must adopt a correct posture (with their feet rest-
ing on the footboard (G) and must agree - together
with the tractor driver - on the most effective speed
of travel.
5) Load the seedlings into the dispenser and keep it
loaded during the planting stage.
6) In the machines equipped with a dispenser with cups
that open, do not load the seedlings into the front
cups as they are continually opening and closing.
Night-time work or poor visibility conditions
Working at night or in poor visibility conditions increases
the risks arising from machine use; in these conditions,
Transit on public roads
WARNING
It is prohibited to carry people and/or things on the
work vehicle.
A
UN41-0153MG
English language
INFORMATION FOR USE
7) The operators on the work vehicle must decide on
the tractor's speed of travel together with the tractor
driver so that a least 60 seedlings can be placed in
the dispenser per minute and correct ejector/seed-
ling timing is obtained.
8) Move forwards with the tractor before starting the
planting.
9) The operators on the work vehicle must check the
planting quality constantly. In the event of anoma-
lies, stop the tractor moving forwards and adopt cor-
rective measures (see "Information on adjustments"
and "Troubleshooting"- pages 19 and 41).
proper lighting must be provided to ensure safe work.
When transporting the work vehicle/tractor assembly,
the regulations of the highway code must always be
complied with.
Obligatorily, the three-point hitch must be secured with
the relative bars (A) to prevent the work vehicle swing-
ing against the tractor and the speed of travel must be
adjusted to prevent loss of control of the tractor.
36
6
Use and maintenance