Oceanic OCEADH20L Guide D'installation page 37

CLEANING AND MAINTENANCE
CLEANING THE DEHUMIDIFIER
1. Swit
2. Clean the air inlet (3) and outlet (4) using a soft cloth.
Dust tends to accumulate in these points.
NOTE: Never use water to w
dirt beneath and around it. Move the unit intermitten
CLEANING THE AIR FILTER
I ter is clogged with dust
every two weeks to prevent this from occurring.
NOTE: T ter should be cleaned every two weeks. I
performance, frost build-up and dripping.
ter
t.
r. If the appliance operates in the same position for several days, check for
ow and unit's performance will be adversely a ected
Technical Data
Page
3. Do not use petrol or solvents.
4. Clean the surface with a soft damp cloth, using
water or mild detergent only.
5. Wipe dry with a dry cloth.
ath it.
nt ventilation ma
1. Remove the Air–inlet (3) out from the back of
the unit
2. Remov ter from the Air-inlet.
3. Clean the Filter
Use a vacuum cleaner to remove the dust fr
I ter is very dirty, clean it with warm water and
neutral detergent. After cleaning it, leave it to dry at room
temperature until all its parts are thoroughly dry.
4. Replac ter
Model No:
Power Supply :
Dehumidity Capacity:
Max. Input Power:
Max. Input Current:
Water Tank Capacity:
Net Weight:
Dimensions：
Room Temperature:
Refrigerant：
Fuse :
of
37 40
ation
OCEADH20L
220V -240V 50Hz ~
20L/Day(30 C /80%）
420W
1.91A
6.5L
14kg
Height 570mm,Length340mm,width240mm
5 C - 32 C
R290 /60g
AC250V3.15A
ter
ter.