Publicité
Les langues disponibles
Les langues disponibles
HOW TO USE THE APPLIANCE
FIRST-TIME USE
After transporting or handling the appliance, wait one
hour, before connecting it to the power supply, make
sure that the appliance rests in the upright position,
on a stable
at surface to prevent leakages. Use
the retractable handle to keep the unit as upright as
possible, never on its side. Leave an appropriate gap as
indicated in the "INSTALLATION GUIDE" paragraph. When
OPERATING MODE DESCRIPTION
Switching the applianc
After connecting the appliance to the power
supply, press POWER button
ON/OFF the appliance. The button can be found on the
right hand side of the control panel (1). After pressing
the POWER butt
Selecting the Mode
Press the DEHUMIDIFY MODE button
(12) to select the operating Mode: Normal,
Continuous, Strong,Laundry program.
Whenever the DEHUMIDIFY MODE button
DEHUMIDIFY
MOOE
is pressed, the operating mode, changes
sequentially:
Normal, ->Cont, -> Strong , ->Laundry.
It starts from the last mode memorized.
Normal Mode: When Normal indicator (31) lights up,
the appliance operates in Normal mode. Allows manual
setting of both fan speed and desired humidity level.
Continuous Mode: When the Cont. indicator
(29) lights up, the appliance operates in Cont.
mode. Automatically sets the fan low speed and the
continuously
Set humidity level is unable.
Strong Mode: when the Strong indicator
lights up, the appliance operates in Strong mode. The
appliance automatically adjusts the fan at high speed
the compressor are working automatically.
Laundry program Mode: when the Laundry program
indicator
(25) lights up, the appliance operates in the
Laundry program mode. The appliance will continue to
dehumidify and keep in high fan speed. The fan speed
and humidity level cannot be adjusted in the Laundry
program mode. The Laundry program mode is suitable
for drying clothing.
the bucket is full or not inserted properly, the Water
Full indicator (20), full bucket indicator lights up and
stops the appliance (read the "Water bucket full function"
paragraph). Do not insert small objects, as these are
dangerous and could causes damage.
NOTE: to avoid poten
Setting the humidity level
(11) to turn
HUMIDITY
SETTING
p"
in LED display ligh
made.
T
this target humidity level.In the Continuous Mode, Strong
mode and Laundry program mode,the
button is not available .
Setting the Fan Mode
FAN
air. The fan speed can be adjusted between "HIGH"
and LOW using the FAN SPEED
Setting the Sleep Mode
SLEEP
Setting the Fan Speed
(27)
FAN SPEED
press the Fan Speed button to set High/Low fan speed.
Page
of
33
40
re hazards, ensure that the
ter is installed before operating the appliance.
Press the "HUMIDITY SETTING " button
(13) to set the desired relative humidity
level between 30% - 80% during normal
dehumidify mode. The "%" indicator % (26)
r
Press the FAN (14) button to select FAN
Mode. The
(32) indicator in the LED
display lights up. The unit turns o the
dehumidifying function and circulate the
Press the "SLEEP"
SLEEP Mode. The
turns on. In SLEEP MODE, the display lights will
be turned o , the unit will continue to work.
Press the FAN SPEED button
the di erent fan speed. The indicator
(24)in the LED display lights up.
When in the Fan Mode and Normal mode, can
re being
room reaches
SETTING
HUMIDITY
(16) button.
(15) button to select
(22) indicator in the LED
(16) to select
(23) or
Publicité
