Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
The appliance shall be stored in a well-ventilated area where the room size corresponds
Do not pierce or burn. Be aware that the refrigerants may not contain an odor.
A ny person who is involved with working on or breaking into a refrigerant circuit should
authorizes their competence to handle refrigerants safely in accordance with an industry
by the equipment manufacturer. Maintenance and repair requiring the assistance of other
skilled personnel shall be carried out under the supervision of the person competent in the
The pipe-work shall be compliance with national gas regulations. The maximum refrigerant
charge amount is 0.060 kg.
transport regulations.
2. Marking of equipment using signs shall be compliant with local regulations.
Regulations.
4. The storage of equipment / appliances should be in accordance with the
manufacturer's instructions.
5. Storage of packed (unsold) equipment Storage package protection should be
constructed such that mechanical damage to the equipment inside the package
will not cause a leak of the refrigerant charge. The maximum number of pieces of
equipment permitted to be stored together will be by local regulations.
6. Information on servicing.
6-1 Checks to the area
necessary to ensure that the risk of ignition is minimized. For repair to the refrigerating
system the following precautions shall be complied with prior to conducting work on
the system.
6-2 Work procedure
Work shall be undertaken under a controlled procedure so as to minimize the risk of
6-3 General work area
6-4 Checking for presence of refrigerant
The area shall be checked with an appropriate refrigerant detector prior to and during
refrigerants, i.e. non-sparking adequately sealed or intrinsically safe.
P
a
g
e
f o
24
40
Publicité
