SSS Siedle S 850-0 Information Produit page 13

Programming the
intercom functions
Programming the intercom functions
is only possible via the PC and is
broken down into two sections.
BTLM 850
BFSV 850
S 850
1 After read­out of the system,
select the device S 850.
08.30
Friday 29.04.2011
4 Programming the cordless
handset:
Select the menu points
Main menu
Intercom settings
Functions
The In­Home bus system is installed
and ready for operation. The system
is linked via the PRI 650-... USB to
the PC and is configured using the
bus programming software, version
2.7 upwards.
Function 1
locale funktion
Rufabschaltung
Call silencing
2 Program the required functions in
the button assignment area.
A maximum of 15 functions may be
stored.
At the end of the function list, this
can be exported and then printed
out.
Function
1 Light
2 Door call
3 Heating on
4 Heating off
5
6
7
OK Delete
5 The function number from the
list (see 3) must be generated at
the same position in the cordless
handset.
Function 1: Light
Function 2: Door call
Function 3: Heating on
Function 4: Heating off
Function 5:
Function 6:
Function 7:
Function 8:
Function 9:
Function 10:
Function 11:
Function 12:
Function 13:
Function 14:
Function 15:
3 This list is a mandatory require­
ment for programming the intercom
functions.
Saving the settings completes the
programming process.
New entry
Name
Heating on
Type
Control Device
Function
3
Save Back
6 It is only possible to save a func­
tion if a name and type have been
defined. Once all the functions have
been entered, the intercom pro­
gramming process is complete.
9