No. Parameter
1) Clock
2)
Temperature
3)
COUP code
4)
DHW set point
5)
Boiler information
6) Installer data
7) Exit
1) Clock
» Press the buttons
enter.
» Press the "set"
hour,
» Press the buttons
» Press "mode"
2) Temperature
» Press the buttons
to enter.
» Press the buttons
» comfort (
» Press the buttons
» Press "set"
3) Coupling code
» See par. 5.4 on page 41.
Display
and
button to select the data to be changed with this sequence:
minutes,
and
to change the value.
to go back.
and
to select the temperature menu, and then "set"
and
to select the temperatures to be changed:
) – economic (
and
to change the value of the selected temperature.
or "mode"
cod. 3541T131 - Rev. 02 - 06/2021
description
Set hours, minutes, year (y), month (m), day (d).
Set the temperature of CFT1, CFT2, ECO, FRST
RF code (see par. 5.4 on page 41)
Set DHW temperature, function available only with
OpenTherm connection
Reading of some boiler parameters only with
OpenTherm connection
Installer parameters
Return to the home page
to select the clock menu, and then "set"
year,
month,
) – frost protection (
to return to the previous menu.
day.
)
EN
to
53