Lamborghini Caloreclima CONNECT Notice D'installation Et D'utilisation page 45

On this screen (fig. 14), if the boiler is connected via OpenTherm protocol, it is
possible to display its status. Also, by clicking on the symbols , the boiler
DHW and heating set points can be changed.
If the boiler is connected via On-Off contact, only the status of the request is
displayed (fig. 15).
fig. 15 With room thermostat
fig. 14 - With openTherm
45
EN
cod. 3541T131 - Rev. 02 - 06/2021