Changing The Battery Of The Hand-Held Transmitter - solamagic ARC Instructions De Montage Et D'utilisation

Checking the programming state
If necessary the following table can be used to identify the relevant programming
state of the wireless receiver in the device. To do so, connect the device as de-
scribed in the ‚installation instructions'.
Mains connection
Briefly press any
key
Briefly press any
key for a second
time
Changing the battery of the hand-held
transmitter:
Warning: Do not touch the battery directly with the skin.
Open the housing cover. Push the battery out sideways
from the clamped position and remove. Insert the
new battery (plus to the top) and reassemble the unit
in reverse order.
12/2016
ARC unprogrammed
IR-Röhre wird eingeschaltet
IR tube is switched on
IR tube is switched to a
higher level
22
ARC wirelessly programmed
Remains off
If programmed key:
On in the last switching state.
Otherwise no reaction
If programmed key: Switch off.
Otherwise no reaction