GGM gastro HB364M Manuel D'instructions Pour L'installation, L'utilisation Et L'entretien page 26

14 CLOCK Icon
Illuminates in red, indicates the TIME display.
15 HUMIDITY Icon
- In MANUAL when I press the humidification button it lights up in red because it energises the
solenoid valve until I keep the button pressed down
- In cooking with programmes if you select a value of humidification (20, 40 etc) flashing red (0.5 on,
0.5 off) in the time when solenoid valve is off
- In cooking with programmes if you select a value of humidification (20, 40 etc) steady red in the time
when the solenoid valve is on. EXAMPLE 20%=2 on solenoid valve - 20 seconds off
- In cooking programmes if I do the humidification manual pressing, at the same time, the two buttons
P1 and P2, steady red till I keep pressing these two buttons down: on solenoid valve.
16 RESISTORS Icon
It lights up in green if the heating is on
Lit up in red means that the heater is also turned off
17 PROGRAMMES Icon
When lit red it indicates that you have entered the programming mode
18 DOOR OPEN Icon
Lights red to indicate that the door is closed
Lights green to indicate that the door is open
19 PHASES Icon
Visible only with programmed cooking
F1, F2, F3, will light up (red colour) one at a time to indicate at which step you are working in a
programme.
1.3 Values on DISPLAY
9 TIME/HUMIDITY display
With the CLOCK icon on, displays the value of the set time and that remaining while cooking.
26