Mains Connection - Renkforce MP-2000 Mode D'emploi

c) Mains Connection
The amplifier and all connected devices must be switched off.
The mains socket to which the amplifier is connected must be easily accessible to quickly
separate the device from the mains voltage in case of an error.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electric shock.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Before plugging in the mains plug, ensure that the device voltage indicated at the amplifier
corresponds to the available mains voltage. Do not connect the device if the indication does not
correspond to the available mains voltage. Wrong supply voltage will cause serious damage.
If an extension line is used, ensure that it is designed for the respective load.
• Connect the mains cable plug (6) to a proper mains socket.
• This POWER (1) mains switch switches the amplifier on and off.
In the "I" position, the device is switched on; in the "O" position it is switched off.
25