F.F. Group ROS 125/430 PLUS Notice Originale page 7

ROS 125/430 PLUS
Tool will not
Internal dam-
age or wear.
start.
Excessive
Internal dam-
noise or
age or wear.
rattling.
Possible
sandpaper
problem.
Sander not
sanding effec-
tively. Possibly
wrong grit of
sandpaper.
MAINTENANCE
Regular inspection and cleaning reduces the ne-
cessity for maintenance operations and will keep
your tool in good working condition. The motor
must be correctly ventilated during tool opera-
tion. For this reason avoid blocking the air inlets.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
EXPLANATION OF SYMBOLS
Double insulation
For indoor use only. Do not expose
to rain.
Wear eye protection.
Damage to lungs if an effective dust
mask is not worn.
Wear protective gloves
Damage to hearing if effective hear-
ing protection is not worn.
To reduce the risk of injury, the user
must read and understand this manu-
al before using this product.
Have techni-
cian service
the tool.
Have techni-
cian service
the tool.
GUARANTEE
Check sandpa-
per for wear
and or damage.
Fine sandpaper
is graded in
large numbers
(100 to 600).
Coarse sand-
paper is small
numbers (36
DECLARATION OF CONFORMITY
to 80).
ƒ We declare under our sole responsibility that this
ƒ Technical file at:
Important!
Conforms to relevant safety stan-
dards
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, completely
assembled, to your dealer or the service Centre for
electric power tools.
product is in conformity with the following stan-
dards or standardized documents: EN 62841-1, EN
62841-2-4, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3 in accordance with the provisions of
the directives 2006/42/EC, 2014/30/EU.
FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos-Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos-Greece. 19/1/2018
English | 7
www.ffgroup-tools.com