Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l'alimentation avant l'installation.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TO INSTALL:
1
INSTALLATION
STEP 1:
Attach the backlight shields onto the luminaire by aligning the feet on the shield with the slots provided in the luminaire optics. Snap the shields into
place by pushing the shields toward the luminaire. See Figure 1.
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
registered trademarks of Cree, Inc.
1 of 1
IMPORTANT SAFEGUARDS
and the Cree logo are
®
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
Backlight Shields
Noctura Series
LED Area Lights
Backlight Shields
www.creelighting.com
LPN00637X0001A0_B

Publicité

loading

Sommaire des Matières pour CREE LIGHTING Noctura Serie

  • Page 1 Attach the backlight shields onto the luminaire by aligning the feet on the shield with the slots provided in the luminaire optics. Snap the shields into place by pushing the shields toward the luminaire. See Figure 1. © 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree and the Cree logo are ®...
  • Page 2 écrans en les poussant vers le luminaire. Voir Figure 1. © 2019 Cree Lighting, une société d’IDEAL INDUSTRIES. Tous droits réservés. À titre informatif seulement. Le contenu est sujet à changement. Allez sur www.creelighting.com/warranty pour obtenir des renseignements sur la garantie et les caractéristiques techniques.