Beper 40.300 Manuel D'instructions page 11

Rechargeable Hair clipper Use instructions
USE
Put the switch on to cut hair.
While making slip the adjustable head on the hair clipper it is possible to regulate the cut length. Pull
up to remove it.
Different positions are available for various cut length :
0.8 – 1.1 – 1.4 – 1.7 – 2 mm (without adjustable head) and 3 – 6 – 9 – 12 mm.
Make slip the adjustable head forward to obtain a longer cut, backwards for shortest cut. After cut-
ting, always switch off the hair clipper.
CLEANING
Always unplug the appliance from the socket.
Remove hair after every use, with the provided brush and distribute a drop of oil on the blades. Use
only mineral oil, as the provided oil ; you can also use oil used for sewing machine..
Clean the external part with a soft cloth lightly wet.
TECHINCAL DATA
Non-stop 90 minutes function
8 hours charge
Power supply: DC 2.4V, 12W
Charger power: 230V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
11
EN