Summer 33213Z Guide De L'utilisateur page 14

troubleshooting
If the gate does not close properly:
1. Gate is not properly aligned in the door
frame.
Solution: To adjust the gate's alignment,
loosen all four tension bolts and reposition
gate so that it matches the "correct" image.
Re-tighten tension nuts.
2. Pressure of tension bolts needs
adjusting.
Solution: Loosen or tighten the upper tension
nuts. Ensure the upper latch handle always
remains below the release button. Ensure the
upper latch handle engages securely when the
gate swings closed and that it releases
Aligned in door frame Mis-aligned
properly when the release button is pressed.
from top to bottom Gate at top is installed
further back then
the bottom of gate
14