User instructions
Audio connection to external amplifier
As an alternative to listen to the audio through your
TV or internal speakers, you can listen through your
home stereo system.
REAR VIEW OF 1D-003308
AMPLIFIER AUDIO INPUTS
1: Connect the unit to your home stereo system using
the White and Red connections on the supplied AV
cable. You may require an additional red/white lead
(not included) to reach your home stereo system.
2: Plug the white end of the cable into the white AUDIO
OUT jack on the unit. Plug the red end of the cable into
the red AUDIO OUT jack on the unit. Now connect the
other end of the cable's white (left channel) and red
(right channel) plugs to your home stereo system's
'AUX IN' jacks.
Operation
WARNING: Tapping or dropping the microphone
while it is on can permanently damage your
microphone. Resist the urge to swing the
microphone around by the cord!
Preperation
This unit is designed to play CD's bearing the
identification logo. If CD's do not conform to the CD
standard, they may not play properly.
TV VIDEO INPUT
• Fingerprints and dust should be carefully wiped off
with a soft cloth. Wipe in a straight motion from the
centre of the disc to the outside edge.
• Never use chemicals, such as record cleaning
sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will
permanently damage the plastic surface of the disc.
• Always place the compact disc on the disc tray with
the label facing upward.
• Compact discs can be played on only one side.
• To remove a disc from its storage case, press down
on the centre of the case and lift the disc out,
holding it carefully by the edges.
• Discs should be returned to their cases after use to
protect them from dust and scratches.
• To prevent warping the disc, do not expose it to
direct sunlight, high humidity or high temperatures
for extended periods of time.
• Do not apply paper or write anything on either side
of the disc. The inks used in some felt-tips pens may
damage the surfaces of the disc.
Turning ON/OFF
1: To turn on the karaoke system, press STANDBY
button, the LED DISPLAY & light effects will
illuminate.
2: To turn off the system, press STANDBY button again,
the LED DISPLAY & light effects will turn off.
Turn Light ON/ OFF
1: Press light button, the light effect will
illuminate.
2: Press light button again, the light effect
will turn off.
15
Page 5