Belkin F5U273 Mode D'emploi page 11

Installation
Video Ports (VGA or DVI)
Connect a VGA cable (sold separately) to the VGA
video-output port on the Docking Station and to an external
monitor. If you have a DVI-capable monitor, you will get better
performance by connecting a DVI cable to the DVI video-
output port on the Docking Station and to the
external monitor.
NOTE: Use this cable instead of the VGA cable and NOT in
addition to it.
Either cable can be connected and disconnected at any time
without unplugging the Docking Station from the ExpressCard
slot on your notebook. The Docking Station supports all
analog CRT and LCD monitors.
How do I disconnect the Docking Station?
1. lf the Docking Station is transferring data through one of its
connections, wait until the data has finished transferring.
2. If you are watching a DVD or other streaming video, please
stop it before disconnecting.
3. If you are connected using the Ethernet port, close your
network connection.
4. Disconnect the ExpressCard cable and/or remove the
ExpressCard from the notebook computer.
You can disconnect the Docking Station while the computer
is running. However, DO NOT reconnect the Docking Station
while the notebook is running. In most notebook computers
this will function correctly, but in a few it will cause a system
error that could require you to reset your computer.
9 9 9
1
2
3
4
5
6