Storage; Care And Maintenance - Kärcher HD 3.5/30-4S Ea Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 Pull the device behind you at the
handle for transporting it over long-
er distances.
 Empty the detergent tank before
transporting in horizontal position.
 When transporting in vehicles, se-
cure the appliance according to the
guidelines from slipping and tipping
over.

Storage

CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance
when storing it.
This appliance must only be stored in
interior rooms.

Care and maintenance

DANGER
Risk of injury by inadvertent startup of
appliance and electrical shock.
Prior to all work on the appliance,
switch off the appliance and pull the
power plug.
Note:
Used oil must only be disposed of by
the designated collection points.
Please turn in used oil there. Polluting
the environment with used oil is prose-
cutable.
Safety inspection/ maintenance
contract
You can sign with your dealer a con-
tract for regular safety inspection or
even sign a maintenance contract.
Please take advice on this matter.
Before each use
 Check connection cable for damag-
es (risk of electrical shock); get the
damaged connection cable re-
placed immediately by an author-
ised customer service person/ elec-
trician.
 Check the high pressure hose for
damages (risk of bursting).
Please arrange for the immediate
exchange of a damaged high-pres-
sure hose.
 Check appliance (pump) for leaks.
3 drops per minute are permitted
and can come out from the lower
side of the appliance. Call Custom-
er Service if there is heavy leakage.
 Check oil level Please contact Cus-
tomer Service immediately if the oil
is milky (water in oil).
 Clean the fine filter.
Unpressurize the appliance.
Unscrew the fastening screws of
the device hood; remove the device
hood.
Unscrew lid with filter.
Clean the filter with clean water or
compressed air.
Reinstall in reverse sequence.
 Clean filter at the detergent suck
hose.
Every 500 operating hours, at
least annually
 Have the maintenance of the de-
vice performed by the customer
service.
 Oil change.
Oil change
Note:
See "Specifications" for oil volume and
type.
 Unscrew the fastening screws of
the device hood; remove the device
hood.
 Turn out the oil drain screw at the
front on the motor casing.
– 9
EN
Weekly
11

Publicité

Table des Matières
loading

Table des Matières