Intended Use - Assa Abloy effeff ePED 1386S00 Manuel D'utilisation

Intended use

®
The ePED Lock interface 1386S00is intended for connection of tested and
approved, conventional escape route locking systems ("Locking elements",
page 49) to the Hi-O Technology™ bus of an escape door system with
according to DIN EN 13637.
The product has been designed for the safeguarding of escape routes and has
been tested according to the requirements of EltVTR. Deviating uses or device
combinations not described in the approval are not permitted.
ASSA ABLOY Sicherheitstechnik GmbH can provide the necessary planning informa-
tion for approved solutions and the devices combinations required for your
application. The usage must be coordinated with the requirements of the
inspection authorities. Please contact the responsible inspection authority for this
purpose.
Compliance with all relevant inspection authority requirements is mandatory for
the use, particularly with respect to the
· coordination of the safety concept with the responsible inspection authority and
· modifications of door elements.
The device is suitable for installation, configuration and use, according to these
instructions. Any use beyond this is deemed as non-intended use; devices
combinations which are not described are not permitted.
EN
38 Notes