Ribind KING PLUS Manuel D'installation page 34

G G
B B ACCESSORIES -
E
XPANDER CARD FOR KS2
!! FEED THE EXP CARD IN WHEN POWER IS NOT SUPPLIED !!
- PEDESTRIAN OPENING COMMAND
- AUTOMATIC PEDESTRIAN CLOSING
- MANAGEMENT OF THE SAFETY EDGE
- 24VAC ACCESSORIES FEEDING
- MANAGEMENT OF THE TRAFFIC LIGHT CONTR
- MANAGEMENT OF THE COURTESY LIGHT
- CLOSING COMMAND AFTER PASSING THROUGH THE
PHOTOCELLS*
E
XPANDER PLEX CARD FOR KS2
LIKE EXPANDER BOARD, BUT IN ADDITION WITH:
- AUTOTEST OF 4 PHOTOCELLS
- AUTOTEST STRIPS
*NOT FOR EXPANDER PLEX
For the connections and the technical data of the optional equipments follow the relevant
handbooks.
D5
D4
D3
D2
code ACG5470
code ACG5472
S
HIELDED WIRE
It is compulsory to use shielded cable for the encoder in order to
guarantee the correct operation of the control board.
The screen of the ENCODER cable must be earth grounded at one
end (not to the card GND), and at the opposite end the screen must
be free (conductor not connected). code ACG2133