Sunex Tools 6625TR Mode D'emploi page 2

PARTS BREAKDOWN AND OPERATING MANUAL
OPERATING INSTRUCTIONS
IMPORTANT: Before attempting to raise a vehicle, check vehicle
service manual for recommended lifting surfaces.
1. To raise load:
Close
NOT OVERTIGHTEN.
that saddle will contact
centered so it cannot slip. Operate jack handle until saddle
approaches the load. Once again check to see that saddle is
correctly positioned. Raise load to desired height. Place jack
stands of appropriate capacity under the vehicle. DO NOT
CRAWL UNDER VEHICLE WHILE LIFTING VEHICLE OR
PLACING OR REMOVING JACK STANDS! Place jack stands
at vehicle manufacturer's recommended lift areas that
provide stable support for the raised vehicle.
2. To lower load: Open release valve VERY SLOWLY. When
release valve is opened, saddle and load will be lowered.
Lower the vehicle slowly so as not to shock load the jack
stands. Once repairs are completed, raise vehicle enough to
remove jack stands. Lower vehicle very slowly.
CAUTION: Keep hands or feet away from the hinge mechanism
of the jack.
LIMITED WARRANTY:
SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX TOOLS
PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools
defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed
to that specific product.
This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our option any part
or unit which proves to be defective in material or workmanship.
Other important warranty information...
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover
any repairs or replacement made by anyone other than Sunex Tools or its authorized warranty service centers.
The foregoing obligation is Sunex Tools' sole liability under this or any implied warranty and under no circumstances shall we be
liable for any incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Return equipment or parts to Sunex Tools, transportation prepaid. Be certain to include your name and address, evidence of the
purchase date, and description of the suspected defect.
If you have any questions about warranty service, please write to Sunex Tools. This warranty gives you specific legal rights and
you may also have other rights which vary from state to state.
Repair kits and replacement parts are available for many of Sunex Tools products regardless of whether or not the product is
still covered by a warranty plan.
SHIPPING ADDRESS:
Sunex Tools
315 Hawkins Rd.
Travelers Rest, South Carolina 29690
6625TR — PARTS BREAKDOWN & OPERATIONS MANUAL
662STR_070606 2
release valve tightly.
Position jack under load
load firmly and load
2.25 Ton Capacity Trolley Jack
SPECIFICATIONS
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.25 Ton
Low Lift Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.12"
DO
Raised Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.76"
so
Handle Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21"
is
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21"
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.5 Lbs.
Chassis Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.25"
Saddle Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2"
® branded products which fail to give satisfactory service due to
MAILING ADDRESS:
Sunex Tools
P.O. Box 4215
Greenville, South Carolina 29608
2
MODEL 6625TR
® BRANDED
rev. 07/07/06
7/11/06 2:46:15 PM