Bestway 58386 Manuel De L'utilisateur page 4

IMPORTANT- Using the pump with an unmatched electrical supply is
dangerous and will result in catastrophic failure of pump.
RISK OF ELECTRICAL SHOCK- Before removing, cleaning, serving or
making any adjustment to the product, always unplug this product from the
electrical outlet.
DO NOT MODIFY THE PLUG IN ANY WAY OR USE PLUG ADAPTORS
TO CONNECT UNIT TO ELECTRIC SUPPLY.
Handle the pump with care. Do not pull or carry the pump by the power
cord. Never pull a plug from the outlet by yanking the power cord. Keep
cord free from abrasions. Sharp objects, oil, moving parts, and heat should
never be exposed to the filter pump.
NOTE:
Please examine equipment before use. Notify Bestway at the customer
service address listed on this manual for any damaged or missing parts at
the time of purchase. Verify that the equipment components represent the
filter pump model that you had intended to purchase.
NOTE:
Place pump on a solid and level ground. Pay attention to position of pool
and pump so adequate ventilation, drainage, and access for cleaning is
available. Never place pump in an area that may accumulate water, or in an
area where foot traffic will flow around the pool.
It is necessary to have the plug accessible after installation of the pool.
NOTE:
Keep the transformer away from the pool and the filter pump more than 3.5m.
NOTE:
Atmospheric conditions may affect the performance and life span of your filter
pump. Unnecessary wear and tear may occur during periods of cold, heat
and exposure to sun. Whenever possible shelter pump from these conditions.
It is important to ensure the factory equipped stopper plugs for the inlet and
outlet ports replace the screens before removal or maintenance on the
pump is attempted.
NOTE:
Do not add chemicals in the filter pump.
Don't plug or unplug the appliance if hand is wet.
Always unplug the appliance:
• On raining days
• Before cleaning or other maintenance
• Leave it unattended on holidays
4 4