Titanwolf 303166 Mode D'emploi page 14

5.1 General profile settings
• Resetting everything: It is possible to reset the settings of all the
profiles back to the factory settings using the "Reset" button in
the "System setting" menu.
5.2 Configuring the profiles
The options, which are explained in detail below, can be individually configured
and saved for each of the profiles. Select the profile which you want to change at
the bottom of the window using the mouse. You can also set that a specific profile
should be loaded at program start. To do this, save the profile you want to use via
"Save". Then click on "Create Profile", enter the profile name exactly as you saved
it and select the program link. Finally, click on "Apply" to apply the settings.
5.2.1 General
• Light setting: In this menu, you can adjust the light effects indi-
vidually. You can choose between continuous light and pulsating
14 English