light (breathing). These can be configured according to your
wishes.
• DPI settings: In this menu, you can configure the DPI levels and
the corresponding DPI values.
• X/Y sensitivity: You can adjust the sensitivity of the Y and X axis
in this menu
• Double-click speed: The double-click speed defines the maximum
time between two clicks, so that it can be registered as a double
click and not two individual clicks.
• Scrolling speed: The scrolling speed of the mouse wheel can be
configured here
• Polling rate: Select your preferred polling rate to define the inter-
vals at which the mouse sends the position data to the computer.
A polling rate of 1000 Hz means that data is sent 1000 times per
second
• Configuring the mouse buttons: The buttons at the top of the
mouse as well as those at the side can be freely configured. Please
click on "Top View" or "Side View" to make the desired settings.
To reconfigure a button, click on the number corresponding to the
desired button in the list on the right of the mouse diagram. The
mapping of numbers and buttons is shown in the diagram. You can
not only choose from preconfigured options, but also make indi-
vidual settings. A special feature is the option of creating macros,
which is explained in detail in section 5.3.
English
15