AEG FU 4002 P Mode D'emploi page 57

Turning off the Alarm
Press the ALM SET button (3) to stop the alarm.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 5 minutes with the
SNZ LIGHT button (1). SNZ1 or SNZ2 flashes on the display.
Deactivate the Alarm Function
1. Press the ALM SET button (3) once. AL1 appears on the display.
2. Then press the UP button to deactivate the first alarm time. The " " symbol goes out
on the display.
3. Press the ALM SET button again. AL2 appears on the display.
4. Press the UP button to deactivate the second alarm time. The " " symbol goes out on
the display.
5. Press the ALM SET button to return to the time display.
Projection
NOTE: Important!
• The display can only be seen in a darkened room.
• The optimum distance for the projection is 3-5 meters.
With this unit, you can project the time onto a wall or the ceiling.
• Press the SNZ LIGHT button (1) to switch on the function for approx. 5 seconds.
• Projector (10) projects the current temperature and projector (5) the time.
• To prevent the projections from overlapping, rotate the projectors in the desired direc-
tion.
Cleaning
CAUTION:
Do not dip the appliance in water.
• Remove the plug before cleaning.
• Clean the appliance with a slightly humid cloth without any additives.
All manuals and user guides at all-guides.com
English
57