AEG FU 4002 P Mode D'emploi page 53

7 DOWN button (°Celsius/°Fahrenheit)
8 UP button (change time format)
9 MODE button
10 Rotatable projector (temperature)
Rear (without illustration)
Battery compartment
Display
1 Radio signal display ( ) / symbol "Battery empty" (
2 Summer time display (DST) / symbol "Set time zone" (ZONE)
3 Symbols for "activated alarm time" ( / )
4 Seconds display
5 Temperature display (TEMP)
6 Weekday display (DAY)
7 "Month / Date" display (MONTH/DATE)
8 Time display
Putting into function
• Select a proper place for the device such as a dry, and even non slip area where you
can easily operate the device.
• If still in place, remove the protection foil from the display.
Inserting the Battery
(Battery is not included with the device)
1. Open the battery compartment on the back.
2. Insert 2 type AA/R6 1.5 V batteries. Mind the correct polarity (indicated on the bottom
of the battery case)!
3. Close the battery case.
4. If the device is not used for an extended period of time, remove the Battery from the
device to avoid any leaking of battery acid.
All manuals and user guides at all-guides.com
English
)
53