Presto SANTE 60420 Manuel D'utilisation page 4

ENGLISH
1) INSTALLATION INSTRUCTIONS
2) PRESTO SANTE Seats/nylon sheathed aluminium mirror
3) PRECAUTIONS FOR USE (The product guarantee depends on the respect for these rules)
INSTALLATION and START UP
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain
the pipes that can damage the mechanisms or water passages (PRESTO® heads that can be dismantled from
front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
4) Adjustable seat installation:
-Attachment with stainless steel screws not supplied (mechanical resistance per screw of 200daN to be ensured).
-Select the type of pin according to the wall, see note.
-Recommended mounting height 50cm at the hinge axis.
Mirror installation:
-The mirror is delivered assembled (screws, pins not supplied).
-Ensure that the 2 lock plate screws are properly tightened
-Pull back the attachment plate covers as much as possible, and mark the drilling positions on the wall of the
attachment plates (3 markings at 120° ) per plate.
-Remove the 2 fixed lugs of the mirror (13 key).
-Install the 2 fixed lugs on the wall, see note (screws, pins not supplied, to be adapted in function of the wall).
-Reassemble the mirror on the fixed lugs by proceeding in the reverse order of disassembly.
Note:
-Ensure the mechanical resistance of the wall.
-The attachment on dry wall requires a suitable internal mechanical structure.
5) Mirror
6) Fixed lug
7) Lock plate screw
8) Attachment plate
9) Attachment plate cover
10) This document is not contractual; we reserve the right to modify the characteristics of our products without
notice.
11) PATENTED and REGISTERED MODELS