SEVERIN TO 2054 Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Before using for the fi rst time
∙ Clean the appliance (see General care
and cleaning) and completely remove any
packing materials.
∙ Before using the appliance for the fi rst
time, let it heat up for 15 minutes with
both heating elements (
Operation). When the appliance is
switched on for the fi rst time, a slight
smell may be emitted. This is normal and
will only last for a very short time. Ensure
suffi cient ventilation.
4-position switch
Off
Upper heat
Lower heat
Upper and lower heat
Turn the 4-position switch to the desired
setting.
The heating elements will only switch on
after the timer is activated.
Timer
The timer can be used for selecting a certain
cooking time (max 60 minutes).
To turn the unit off, turn the switch to position
0.
To pre-programme the cooking time, turn the
switch clockwise to the desired time.
To set a time of less than 10 minutes, turn the
timer to a somewhat higher setting fi rst and
then slowly turn it back to the desired time
setting. After the pre-programmed time has
elapsed, an acoustic signal indicates that the
All manuals and user guides at all-guides.com
heating elements are switched off.
Indicator lamp
The indicator lamp lights up when the
appliance is switched on with the timer. It
goes out once the pre-programmed time has
elapsed, or if the switch is turned back to
position 0.
Interior compartment temperature
The interior operating temperature is around
) on (see
200 °C.
Operation
∙ Pre-heat the oven compartment for
∙ Place the food to be cooked onto the
∙ Close the glass door and use the timer to
∙ After the pre-programmed cooking time
∙ To interrupt the cooking process, set the
∙ When opening the hot glass door after
∙ After use, set the 4-position switch to the
General care and cleaning
∙ Before cleaning the appliance, ensure it is
several minutes with the door closed,
using the 4-position switch to set the
required temperature, and the timer to set
the desired pre-heating time.
rack. When cooking food containing fat
or moisture, use the tray to stop any drips
into the interior of the appliance.
choose the desired cooking time.
has elapsed, the timer will automatically
switch off the heating elements.
timer switch to 0.
operation, always use the handle. To
remove the baking tray, always use a
suitable oven-cloth Always place the tray
on a heat-resistant surface.
'
' position and remove the plug from
the wall socket.
11

Publicité

Table des Matières
loading

Table des Matières