Toparc 063228 Mode D'emploi page 7

Translation of the original manual
2) Place key number 1 in the axis to lock the
tool rotation.
Fit the cap number 2 on the tightening nut.
Hold the cap 1 fixed and unscrew the cap 2
clockwise.
3) Insert the recess into the cylinder all the way
to the stop.
Place the cutting head in the hole of the recess.
Make sure that the cutting head is 2/3rd out.
Then screw the nut to lock the cutter in its
holder.
4) Overview of the cutting head in place on
the mini milling machine.
INCLUDES
• Two wrenches
• Recess tools : Ø 6 mm and Ø 3 mm
• Round cutting head Ø5 mm tungsten carbide with Ø3 mm axis
• Instructions
• Air connector 1/4''
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
MINI MILLING MACHINE
EN
7