Publicité
Les langues disponibles
Les langues disponibles
1. Vacuum Motor Hung Up
2. Pump Motor Hung Up
1. No Power to the Pump
2. Jets on Wand are Clogged
3. In-Line Water Filter is Clogged
4. Debris in Solution Tank Covering Inlet
5. Kinked or Loose Hose
6. Pump Failed
7. Quick Disconnects are not Completely Locked Together
8. Heater is Clogged with Deposits
9. Pump is Pulsating
10. Auto Prime Valve is Open
8
Electrical System
PROBLEM: Burning Smell
CAUSE
Pump System
PROBLEM: Pump is not running properly
CAUSE
SOLUTION
1. Replace Vacuum Motor
2. Replace Pump
SOLUTION
1.Check the Electrical System
2. Clean Jet Filters
3. Clean In-Line Filter
4. Clear Debris
5. Check and Replace Hoses if Necessary
6. Replace Pump
7. Snap Quick Disconnects Together\
8. Flush Heater with System Maintainer or Replace if Necessary
9. Check for Clogged Jets and Clean
10. Close Valve
Publicité
