Duronic SM100 Mode D'emploi page 4

Specifications
Model: SM100
Rated voltage: 220-240V~50/60Hz
Power consumption: 450W
Protection class: II
This device has been tested according to all relevant current CE guidelines, such as
electromagnetic compatibility and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
General Safety Instructions
Read the operating instructions carefully before use. Keep the instructions including
the warranty, the receipt and, if possible, the box with the internal packing.
- The appliance is designed exclusively for private use and for the envisaged purpose.
This appliance is not fit for commercial use. Do not use it outdoors. Keep it away from
sources of heat, direct sunlight, humidity and water. Do not use the appliance with wet
hands. If the appliance is wet unplug it immediately.
- When cleaning and storing the appliance, switch off the appliance and unplug (pull
on the plug, not the cable). If the appliance is not being used, remove the attached
accessories.
- Do not leave the appliance unsupervised.
- Check the appliance and the cable for damage on a regular basis. Do not use the
appliance if it is damaged.
- Do not try to repair the appliance on your own. Always contact an authorized
technician, the manufacturer, our customer service or a qualified person.
- Use only original spare parts.
- Do not interfere with any safety switches.
- Do not insert anything into the rotating hooks while the machine is working.
- Place the machine on a smooth, flat and stable working surface.
- Do not allow small children to play with the foil as there is a danger of suffocation.
6
Children Safety
- In order to protect children from the hazards of electrical equipment, please ensure
that this device is only used under supervision. This device is not a toy. Do not allow
small children to play with it.
- In order to ensure your children's safety, please keep all packaging (plastic bags,
boxes, polystyrene etc.) out of their reach.
- In order to protect children from the hazards of electrical equipment, please ensure
that this device is only used under supervision. This device is not a toy.
Cleaning
- Before cleaning remove the mains lead from the socket.
- Never immerse the housing with motor in water!
- Do not use any sharp or abrasive detergents.
Motor Housing
- Only a damp rinsing cloth should be used to clean the outside of the housing.
Mixing Bowl, Mixing Equipment
CAUTION:
- The components are not suitable for cleaning in a dishwasher. If exposed to heat or
caustic cleaners they might become misshapen or discolored.
- Components that have come into contact with food can be cleaned in soapy water.
- Allow the parts to dry thoroughly before reassembling the device.
- Please apply a small quantity of vegetable oil likely to the screens after they have
dried.
7