Stopping/Restarting Your Washer - Whirlpool Estate TAWS700EQ1 Guide D'utilisation Et D'entretien

OPER A T IN G YO U R W A S HE R
5. Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
•
See pages 13 and 14 for loading
suggestions.
•
To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
6. Select a Wash-Rinse Temperature with
the Water Temperature Selector. Match
the water temperatures with the type
of fabric and soils being washed.
• See page 15 for water temperature
guidelines.
7. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle you
want. See pages 7 and 8.
8. Pull out the Cycle Control Knob to
start the washer.

Stopping/restarting your washer

•
To stop the washer at any time, push in
the Cycle Control Knob.
•
To restart the washer, close the lid (if
necessary) and pull out the Cycle Control
Knob.
6
MEDIUM
SMALL LARGE
EX EX
SMALL LARGE
WATER
LOAD SIZE
SAVER
WARM COLD
COLD COLD
HOT WARM
COLD WARM
WASH
TEMPERATURE
RINSE