Maverick ScoutRC MSC-30BR-SCOUT-WP Mode D'emploi page 4

Items required for operation
4 * AA Batteries for the
Transmitter
Charging the battery pack
Always use the included charger for the included battery pack. Charging time for an empty battery pack is about 6
Cautions
• This charger can be used only for the battery pack included in this kit.
the battery pack.
burns.
• If you are not sure about the level of the battery pack before charging use it in the vehicle until the vehicle slows,
leave to cool and then recharge.
1. Select your regions electrical mains plug and attach it to the charger. Always use the correct mains plug version for
your country.
2. Connect the charging socket to the supplied battery packs power plug. The connectors are sided and have a clip to
Installing the Transmitter Batteries
Installing the battery pack
Open the battery holding
tray to expose the empty
battery slots.
Insert 4 AA batteries
into the marked spaces.
Please note the correct
direction of the batteries
You need to insert the
battery pack in the open
section for the battery.
Use the chassis cut-out
for corner wiring if
needed. Use the straps
provided to secure the
battery in place.
1
4
Incorrect battery insertion
could damage the transmitter
2.4Ghz technology has done
away with the need for long
extendable aerials. The Aerial
on your transmitter is located
internally
Once fastened and secured
please connect the battery
plug into the speed controller
plug noting correct polarity.