Symbol LS 4000 Guide Utilisateur page 7

Q u i c k
Aiming
Scan the Entire Symbol
• The scan beam must cross every bar and space on the symbol
(as in the left bar code below).
• The larger the symbol, the farther away you should hold the
scanner.
• Hold the scanner closer for symbols with bars that are close
together.
Right
Note: LS 4000 series scanners require no user maintenance.
What Does The Beep Mean?
When you hear 1 beep (short high tone) it means data has been
decoded successfully. If any other beeps are heard, contact the
technical person in charge of scanning.
R e f e r e n c e
5
Wrong