Publicité
Les langues disponibles
Les langues disponibles
Perform a service search
Network Setup
You need to set up a network connection to enjoy web-enabled features on this unit.
1 Select the Installation > Searching menu.
2 Move down to the Start Search item, and press the
£
¢ ¡
button.
OK
3 When the scan is complete, press the
services list.
* If your providing operator is one of the following, you
are able to use the FastScan feature:
• Canal Digital
• TV VLAANDEREN
• TeleSAT
• AustriaSat
• Skylink / CS Link
1 Connect your Ethernet cable from your router to the
digital receiver.
£
¢
¡
> Installation > Network Setting > IP
2 Press
MENU
Setting.
3 It is recommended to use a dynamic IP address by
the router therefore select DHCP as the connection
type.
However if a static connection is set then please re-
fer to your router for an IP address, Subnet Mask,
Gateway, Primary DNS, Secondary DNS.
4 Scroll down to activate profile and press
remote.
£
¢ ¡
OK
to save the
£
¢ ¡
on the
OK
9
Publicité
