Format S 1 Instructions D'utilisation Et De Montage page 7

oPeRating and Mounting instRuCtions
s1 safes according to en 14450
Contents
1. Manufacturer's instructions for safe operation
2. Operation
3. Anchoring and assembly
4. Limitation of liability / certifi cation expiry
5. Maintenance and Service
6. Disposal
By buying this safe, you have chosen a quality product with certifi ed security. This manual
describes how to operate and install your safe.
Please read this manual carefully before using your safe and keep it in a safe
place!
scope of the manual:
Security level S1 according to EN 14450
The type plate (certifi cation tag) with the model name (serial no.), the security class (secu-
rity level) and the certifi cation number (cert. mark no.) is located in the upper area on the
inside of the door. Please specify this information if you have any questions.
If you want to insure the contents of your safe, please clarify the exact sum insured with
your property insurer.
1. ManuFaCtuReR's instRuCtions FoR saFe oPeRation
• Before initial use (opening the safe door), make sure that the safe has been set up
correctly. The safe must also be secured against tipping.
• When closing the safe door, make sure that there are no limbs between the safe door
and the safe body. Otherwise, there is a risk of injuries due to limbs becoming trapped.
• Before closing the safe door, you must make sure that the locking bolts in the safe
door are retracted. When closing the door, extended latch bolts knock against the vault,
damage the latch and cause it to malfunction.
• Security against tampering: To prevent unseen tampering, the cover plate for the locking
mechanism is provided with a seal.
WaRning! Risk to liFe!
Packaging and protective fi lms may cause suffocation. Keep packaging and
protective fi lms away from children.
2. oPeRation
2.1 opening the door
safes with a double bit key lock: (Right door hinge)
Insert the key and turn clockwise to the right until it stops, then fully turn the handle clock-
wise to the right, and pull the door open.
For safes with door hinges on the left, the door handle must be turned anti-clockwise when
opening to the left.
Please note that double bit keys have two different sides (bits). When inserting the key into
the keyhole, the longer side must point towards the door handle.
safes with an electronic code lock:
The electronic code lock comes with its own seperate manual.
important: Please change the default factory code and replace it with your own code.
EN
7