Digikeijs DR80010 Manuel page 11

CV CV CV Definition CV Definition
47 47 Presets Presets
Bit Function Bit Function
0 0 Bulb Bulb
Fluorescent Fluorescent
1 1
light light
48 48 Set 117-120 This configuration varia- Set 117-120 This configuration varia-
ble (CV) sets the CVs 117-120 simulta- ble (CV) sets the CVs 117-120 simulta-
neously. This is a write-only CV neously. This is a write-only CV
109 PWM period (pulse-width modula- 109 PWM period (pulse-width modula-
tion) The resolution used by the inter- tion) The resolution used by the inter-
nal PWM to manage effects and dim- nal PWM to manage effects and dim-
ming values ming values
111 Fade speed The speed with which the 111 Fade speed The speed with which the
outputs configured to have a fade outputs configured to have a fade
function fade in and out function fade in and out
112 Flicker speed The speed with which the 112 Flicker speed The speed with which the
outputs configured to flicker do so outputs configured to flicker do so
Output configuration "lighting for" Output configuration "lighting for"
113 113
Function of the "lighting for" output Function of the "lighting for" output
(white on the basis of a combination (white on the basis of a combination
of bit 5 and 7 results in Phase-B blin- of bit 5 and 7 results in Phase-B blin-
king. The broken light effect is not king. The broken light effect is not
available while blinking). available while blinking).
Bit Bit Function Function
Light intensity / dimmer Light intensity / dimmer
0 - 3 0 - 3 Value 0 is completely dimmed. Value Value 0 is completely dimmed. Value
15 is maximum light strength. 15 is maximum light strength.
Fade in and fade out effect. Fade in and fade out effect.
Value 0 is off. Value 1 is on. Value 0 is off. Value 1 is on.
4 4
Fade speed can be controlled with Fade speed can be controlled with
CV111. CV111.
Flicker effect. Waarde 0 is uit. Waarde Flicker effect. Waarde 0 is uit. Waarde
5 5 1 is aan. Knipper snelheid is regelbaar 1 is aan. Knipper snelheid is regelbaar
in CV112 in CV112
Random light start up. Random light start up.
Value 0 is off. Value 1 is on. Value 0 is off. Value 1 is on.
Starting speed can be controlled in Starting speed can be controlled in
CV111. When combined with bit 4 CV111. When combined with bit 4
6 6
(fade), the light starts with a flash befo- (fade), the light starts with a flash befo-
re slowly fading in (gas lamp effect) re slowly fading in (gas lamp effect)
Important: The light intensity value (bit Important: The light intensity value (bit
0-3) must be 14 or less. 0-3) must be 14 or less.
Broken light effect. Value 0 is off. Va- Broken light effect. Value 0 is off. Va-
lue 1 is on. CV110 controls the speed lue 1 is on. CV110 controls the speed
7 7
with which randomly failing lights are with which randomly failing lights are
simulated. simulated.
114 "Lighting reverse" - see CV 113. 114 "Lighting reverse" - see CV 113.
115 Configuration AUX1 - see CV 113. 115 Configuration AUX1 - see CV 113.
116 Configuration AUX2 - see CV 113. 116 Configuration AUX2 - see CV 113.
117 Configuration LED group - see CV 113. 117 Configuration LED group - see CV 113.
118 Configuration LED group 2 - see CV 113. 0-255 118 Configuration LED group 2 - see CV 113. 0-255
119 Configuration LED-group 3 - see CV 113. 0-255 119 Configuration LED-group 3 - see CV 113. 0-255
120 Configuration LED group 4 - see CV 113. 0-255 120 Configuration LED group 4 - see CV 113. 0-255
141 141
Function mapping Function mapping
see page 14 see page 14
- -
192 192
Value Bit Function Value Bit Function
0 0 2 2 Gas lamp Gas lamp
0 0 3 3 On - Off On - Off
P11 P11
Range Value Range Value
0 – 3 0 – 3 n/a n/a
Value Value
See CV See CV n.a. n.a.
117 117
1-255 1-255 23 23
1-255 1-255 10 10
1-255 1-255 128 128
0-255 0-255 15 15
Value Value
Def. 15 Def. 15
Val. 0-15 Val. 0-15
Def. 0 Def. 0
Val. 0-16 Val. 0-16
Def. 0 Def. 0
Val. 0-32 Val. 0-32
Def. 0 Def. 0
Val. 0-64 Val. 0-64
Def. 0 Def. 0
Val. 0-128 Val. 0-128
0-255 0-255 31 31
0-255 0-255 31 31
0-255 0-255 31 31
0-255 0-255 31 31
31 31
31 31
31 31
0-255 0-255 1 1
0 0
0 0