Maintenance; Cleaning; Storage; Disposal - TOOLCRAFT 2498121 Mode D'emploi Original

a) Maintenance
• Check the blade (1) for wear and damage before and after each use.
• If the blade (1) no longer cuts cleanly or gets caught on the material you are cutting, have the blade sharpened by
a specialist.
• After cleaning, apply maintenance oil or spray to the blade (1). This prevents corrosion and keeps the blade (1)
moving smoothly.
b) Cleaning
• Always clean the product immediately after use to prevent dust and dirt from settling.
• Keep dust and dirt off the safety mechanisms, ventilation slots and the motor housing.
• Remove dirt and foreign bodies from the blade with a brush.
• To clean the motor housing, use a dry or slightly damp clean and lint-free cloth.
• Thorough cleaning keeps the product in a usable condition and prolongs its lifespan. A good craftsman is careful
with his tools!
c) Storage
• When storing or not using the appliance, protect the blade (1) with the blade guard.
• Store the appliance in a clean and dry place. Avoid frost.
• Keep the device and especially the plastic parts away from substances such as brake fluid, petroleum, oil-containing
substances and penetrating oil. These substances contain chemicals that can damage or destroy the plastic parts.
• Fertilizers and other garden chemicals contain substances that can attack metals. For this reason, do not store the
device close to such substances.
• Store the device, the original operating instructions and the accessories in the original packaging. This ensures that
you will always have all the necessary information and accessories at hand.

11. Disposal

Electronic devices are recyclable waste and must not be disposed of in household waste. At the end of its
service life, dispose of the product in accordance with applicable regulatory guidelines.
27