ENGLISH
Wall washbasin
knee
hot and cold water knob
Ref. 061202
Contents
- Sheathing for wall washbasin.
461004 - Turning tap 160x180x1 (50mm nut).
461206 - H-H 1/2" (550mm) fl exible hose with stainless steel mesh.
460404 - 1/2" M-M timer button.
461604 - 1/2" M-H-M non-return mixer.
461802 - 1/2" M-H 90° knee.
454202 - 2 1/2" valve with trough for 500mm sink.
409824 - Plastic nylon Fisher 8x40mm peg.
421240 - 60x5mm hook.
Assembly
Check the contents.
Avoid dirt in pipes and in the area before assembly.
If the plumbing is new, let the water fl ow.
When assembling, it is advisable to use special gloves not to get cuts on hands.
Connet both knees for each of the buttons output. To seal the connection use teffl on
·
Fig. 1
Connect the output of the mixer T to the input knee of the button. (See arrow at the
bottom of the button) ·
Fig. 1
Connect the mixed water fl ex hose that goes with the output knee (see point of button
arrow to check the input direction ) Use Teffl on to seal the connection ·
Introduce the pipe in the upper orifi ce and fi x it the attached bolts ·
Connect the free end of the mixed water fl ex hose to the output.
Introduce the push button in the orifi ce from the inside of the case and fi x it with its
bolt from the outside.
Assemble the discharge valve ·
Fig. 3
English
FRICOSMOS
For a total recommended height of 850mm make two holes on the wall with a 8mm
drill at a 825mmheight. These holes must have a separation of 385mm.
Fix the washbasin on the wall ·
You can now connect the water input and the discharge to the washbasin.
Adjust the desired temperature by turning the non-return mixing crown.
Handling
To open the water keep the button pressed with the knee or thigh.
To stop the water release the button.
Temperature can be adjusted with the non-return mixer handle.
Maintenance
•
Use only water and neutral soap when cleaning.
•
Wipe with a soft cloth.
•
Rinse with plenty of water.
•
Dry with a soft cloth.
•
Do not use acids or strong detergents and do not rub with a scourer or spatula.
Safety
When cleaning, be extra careful with corners.
Other hazards have not been observed.
Available spares
Fig. 1
461004 - Turning tap 160x180x1 (50mm nut).
461206 - H-H 1/2" (550mm) fl exible hose with stainless steel mesh.
Fig. 2
460404 - 1/2" M-M timer button.
461604 - 1/2" M-H-M non-return mixer.
461802 - 1/2" M-H-M 90° knee.
454202 - 2 1/2" valve with trough for 500mm sink.
Fig. 4
All sizes are described in mms.
English
FRICOSMOS